Publication Details

  • Sudeep, U., Pandey, R.K. and Tandon, N., Effects of surface texturing on friction and vibration behaviors of sliding lubricated concentrated point contacts under linear reciprocating motion, Tribology International, 62, 2013, pp 198-207.
  • Patel, V.N., Tandon, N. and Pandey, R.K., Vibration studies of dynamically loaded deep groove ball bearings in presence of local defects on races, Procedia Engineering, 64, 2013, pp 1582-1591.
  • Behera N., Agarwal V.K., Jones M. and Williams K.C. “Modeling and analysis of solid friction factor for fluidized dense phase pneumatic conveying of powders”, Particulate Science & Technology, 2013 Vol. 31 (2) pp 136-146
  • Behera N., Agarwal V.K., Jones M.G. and Williams K.C. (2013), “Modeling and analysis for fluidized dense phase conveying including particle size distribution”, Powder Technology, Vol. 235 pp 386-394.
  • Behera N., Agarwal V.K., Jones M.G. and Williams K.C. (2013), “CFD modeling and analysis of dense phase pneumatic conveying of fine particles including particle size distribution”, Powder Technology, Vol. 244 pp 30-37.
  • David Mills and Vijay Agarwal (2013) Material feed rate control for pneumatic conveying systems, Bulk Solids Handling, No 3, 2013 pp 20-24
  • Behera N., Agarwal V.K., Jones M.G. and Williams K.C. (2013), Modeling and Analysis of Dilute Phase Pneumatic Conveying of Fine Particles, Powder Technology, Vol. 249 (2013) pp 196-204.
  • Asjad M., Kulkarni M.S. and Gandhi O.P., Supportability based contract alternatives for operating life of a mechanical system, International Journal of Indian Culture and Business Management, Vol. 6 (1), 2013, 102-114.
  • Kumar Girish, Jain Vipul and Gandhi, O.P., “Availability analysis of repairable systems using analytical semi-Markov approach”, Quality Engineering, 25 (2), 2013, 97-107.
  • Gupta Piyush, Gupta Shashank and Gandhi O.P., “Modeling and evaluation of MTTR at product design stage based on contextual criteria”, J. Engg. Design, Vol 24 (7), 2013; 499-523.
  • Asjad M., Mohite S., Kulkarni M.S. and Gandhi O.P., “Opportunistic actions for sub-assemblies of a reciprocating compressor: An LCC based approach, International Journal of Performability Engineering, Vol. 9 (3), 2013, 273-285.
  • Aju Kumar, V.N. and Gandhi, O.P., “Evaluation of green maintenance initiatives in design and development of mechanical systems using an integrated approach”, Journal of Cleaner Production, Vol. 51, 2013, 34-46.
  • Gupta Piyush, Gupta Shashank and Gandhi O.P., “Ontological modeling of spatial shaft-position knowledge for steam turbine rotor”, International Journal of Systems Assurance Engineering and Management, Vol. 4 (3), 2013, 284-292.
  • Asjad M., Kulkarni M.S. and Gandhi O.P., “A life cycle cost based approach for O & M support for mechanical systems”, International Journal of Systems Assurance Engineering and Management, Vol. 4 (2), 2013, 159-172.
  • Aju Kumar, V.N., Gandhi Minu Shikha and Gandhi, O.P., “Identification and assessment of factors influencing human reliability using fuzzy cognitive maps”, 2013, Quality and Reliability Engineering Int. (DOI: 10.1002/qre.1569).
  • Kumar Girish, Jain Vipul and Gandhi, O.P., “Feasibility of analytical solution for transient availability using semi-Markov process”, Int. J. Reliability and Safety, Vol. 7 (4), 2013, 388-410.
  • Kumar Girish, Jain Vipul and Gandhi, O.P., “Availability analysis of repairable mechanical systems using analytical semi-Markov model and Monte Carlo simulation”, Int. J. of Operation Research, 25, 2013, 97-107.
  • Sini N. K, Jayashree Bijwe, Indra K. Varma, “Thermal properties of bisitaconimide and bisbenzoxazine blends”, Journal of Thermal Analysis and Calorimetry 116,1,(2014) 427–434 DOI: 10.1007/s10973-013-3523-3 (IF: 1.982). ( published online Dec 2013 ).
  • Sini Nalakathu Kolanadiyil, Jayashree Bijwe, Indra K. Varma, “Synthesis of itaconimide/nadimide-functionalized benzoxazine monomers: Structural and thermal characterization”, Reactive & Functional Polymers 73 (2013) 1544–1552 (IF: 2.504).
  • Bimlesh Lochab, Indra K. Varma and Jayashree Bijwe, Blends of Benzoxazine Monomers: Effect of Structure and Composition on Polymer Properties J. of Thermal Analysis and Calorimetry (2013) 111:1357-1364
  • Mohit Sharma, Jayashree Bijwe, Edith Mäder Klaus Kunze Strengthening of CF/PEEK interface to improve the tribological performance in low amplitude oscillating wear mode, Wear 301, 1–2, April–May (2013), 735-739 (Also presented in 19th Intl Conf on Wear of Materials 2013 (WOM), Portland, Oregon, USA – April 14-18, ) Wear 301, 1–2, April–May (2013),  735-739
  • Ajay Kumar Kadiyala, Jayashree Bijwe Surface lubrication of graphite fabric reinforced epoxy composites with nano and micro sized hexagonal boron nitride Wear 301, 1–2, April–May (2013),  802-809 (also in 19th Intl Conf on Wear of Materials 2013 (WOM), Portland, Oregon, USA – April 14-18)
  • Jayashree Bijwe, Sanjeev Sharma, Mohit Sharma, Tushar Parida, Prakash Trivedi Exploration of potential of solid lubricants and short fibers in Polyetherketone (PEK) composites; Wear 2013 301, 1–2, April–May (2013),  810-819 (Also presented in 19th Intl Conf on Wear of Materials 2013 (WOM), Portland, Oregon, USA – April 14-18)
  • Sudhir Tiwari, J. Bijwe and S. Panier Strengthening of a Fibre-Matrix Interface: A Novel Method Using Nanoparticles; in Nano-materials and Nanotechnology, 3, 3, (2013),1-8.
  • Mukesh Kumar, Jayashree Bijwe Optimized selection of metallic fillers for best combination of performance properties of friction materials, Wear, 303, Issues 1–2, 15 June 2013, 569–583
  • Mukesh Kumar Dubey, Jayashree Bijwe, SSV Ramkumar PTFE based nano-lubricants, Wear, 30 Aug (2013), 80–88
  • Sanjeev Sharma Jayashree Bijwe and Mukesh Kumar " "Comparison Between Nano- and Micro-Sized Copper Particles as Fillers in NAO Friction Materials"; Nano-materials and Nanotechnology;  31 July, (2013) 3, Art. 12:2013,1-9
  • Sudhir Tiwari and Jayashree Bijwe Various ways to strengthen the fiber-matrix interface for enhanced composite performance, Surface and Interface Analysis 45, (2013), 1838-1848.